Adjusting The Steering Unit; Adjusting The Seat - Vermeiren One Manual De Instrucciones

EN
NL

3.5.1 Adjusting the steering unit

WARNING
• Turn the scooter off before you adjust the angle of the steering unit.
• Do not lean with your whole body on the steering unit.
The steering unit can be adjusted to many different positions (stepless) to suit
each driver.
1. Loosen the star knob (6).
2. Adjust the steering unit to the desired position.
3. Fasten the star knob (6).

3.5.2 Adjusting the seat

WARNING
• Make sure that the seat is locked securely.
Removing the seat
1. Pull up the seat lever.
2. Turn the seat a little bit and lift the seat out of the adjustment
bar. If you encounter resistance when removing the seat,
disengage the seat rotation lever and swivel the seat back
and forth while lifting up the seat.
3. Release the seat lever.
Placing and locking the seat into place
1. Pull up the seat lever.
2. Place the seat on the adjustment bar and, at the same time, keep the seat lever pressed in.
3. Release the seat lever.
4. Make sure that the seat is firmly secured.
Swivelling the seat
1. Pull up the seat lever.
2. Turn the seat in the desired direction.
3. Release the seat lever.
4. Make sure that the seat is firmly secured.
Seat height adjustment
The seat height can be adjusted in 4 positions (range 45
mm).
1. Remove the seat and battery pack.
2. Remove the locking pin that holds the seat support
into place.
3. Raise/Lower the seat support to the desired height.
4. Insert the locking pin to secure the seat support into
place.
5. Replace the seat and battery pack. Make sure
everything is firmly secured.
Risk of injury
Risk of injury
12
One
2022-09
Using your scooter