Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5. Unscrew and remove the bottom hinge pin, turn the bracket over and replace it.
6. Refit the bracket fitting the bottom hinge pin. Replace
both adjustable feet.
7. Place the door back on. Ensure the door is aligned
horizontally and vertically so that the seals are closed
on all sides before finally tightening the top hinge.
8. Insert the hinge bracket and screw it to the top of the unit.
9. Use a spanner to tighten it if necessary.
10. Put the hinge cover and the screw cover back.
180°
55
Publicidad
Tabla de contenido
