VFG
| Walking Aid
5. Use of the helper
5.1. Adjust stick height
•
Press the spring pins on both sides and bring thewalking aid into
the orthopaedically correct position.
•
Snap the spring pins back into place on both sides.
5.2. Application of the helper
•
Use the walker only on firm and level ground.
•
When walking, the walker should be used with the less
extendedfeet to the side of the user, otherwise there is a risk of
tripping, see illustration (Fig. 2).
•
Make sure that the four-legged support is always placed vertically
2.
and not too and not too far away from your body.
•
All four feet of the walker must have a firm grip before you move
forward with small steps.
The walker may only be used by persons with a maximum user
weight of 100 kg.
26
26
Be careful of your fingers when adjusting,
there is a danger of getting caught.
Ensure that the plug connections are correctly
seated.
6. Technical data
Dimensions and weights
Total height (mm):
Height adjustment steps
Unladen weight (kg):
Max. User weight (kg):
Material
Frame
The dimensions given are subject to manufacturing tolerances
of +/- 10mm.
Bischoff & Bischoff GmbH |2022-09-16 Revision: 2
VFG
Walking Aid |
740 - 970
10
0,8
100
Bronze anodised
27
27