Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
BUOYANCY CHAMBER – INFLATION SYSTEM
II -3-INFLATION SYSTEM
THE INFLATION PUMP
a. adaptor
b. tube nozzle
c. tube base
d. inflation port
"EASY - PUSH"
VALVES
To change position
Push
INFLATING THE ENGINE
Attach the hose connector to the inflation pump inflation port.
To inflate your boat properly, the inflation pump should be correctly placed on the ground.
The boat inflates rapidly if the inflation pump is used smoothly and without haste.
WARNING
in inflating position
The membrane is closed, the
plunger is up
BUOYANCY CHAMBER- PRESSURE
Activate all valves in the inflation position.
DO NOT USE A COMPRESSOR OR COMPRESSED AIR CYLINDER.
Page 12 / 28
d
in deflating position
The membrane is open, the
plunger is down
a
b
c
Publicidad
Tabla de contenido
