Iberspa SW11487 Manual De Uso E Instalación página 36

PRE-SET FILTER CYCLES
Main Screen
To next item in
Main Menu
PURGE CYCLES
In order to maintain sanitary conditions, as well as protect against freezing, secondary
If the Filter Cycle 1 duration is set for 24 hours, enabling Filter Cycle 2 will initiate a
purge when Filter Cycle 2 is programmed to begin.
MEANING OF FILTER CYCLES
36
| TP600
While the Temperature is still
until MODE appears in the LCD.
to show RUN HRS
to show F1 ENDS xx:xx
To Set
To Set
to show RUN HRS
to show F1 ENDS xx:xx
| TP600
| TP600
Sets start hour
Selects minutes
Sets Filter 1 length in hours Selects part of an hour
To Set
*****
Waiting several seconds will lose
any new Filter 1
Start Time and Run Hours and revert
to the previous Filter 1 settings.
Main Screen
Waiting
Several Seconds
Reverts to Original Setting
*****
To Set
Selects minutes
Sets start hour
Sets Filter 2 length in hours
Selects part of an hour
To Set
*****
Waiting several seconds will lose any
new Filter 2 On/OFF,
Start Time and Run Hours and revert
to any previous Filter 2 settings.
Sets 15-minute increments
Waiting
Several Seconds
Reverts to Original
Setting
*****
Sets 15-minute increments
Wait to Revert
*****
Waiting
Sets 15-minute increments
Several Seconds
Reverts to Original
Setting
*****
Sets 15-minute increments
*****
Main Sc r een
Main Screen