Jets Operation - Iberspa SW11487 Manual De Uso E Instalación

5.3. Jets operation

The water jets provide a hydrotherapy pressure jet. It is a closed circuit, where the water
is absorbed by 1 or 2 pumps (depending on the SPA model) through the drain and driven
to the jets.
To adjust the amount of air driven into the jets, simply turn the air input tab (venturis) as
follows.
Each air inlet activates a certain group of jets.
this, proceed as follows:
ATTENTION
Do not attempt to turn the outer ring of the jet, forcing it because you could
damage it.
028
029
ENG
41