Installation; Personal Protection Devices - Casals QUANTICA EEC Manual De Instalación, Operación Y Mantenimiento

13. INSTALLATION

General warnings and use of symbols
Before carrying out any type of operation, each operator must be perfectly familiar with the operation of the
machine and its controls and must have read and understood all the information contained in this manual.
All operations performed on the machine must be carried out by qualified personnel in compliance with the
national legislation in force in the country of destination.
Installation and maintenance of the machine must be performed in compliance with applicable national or
local legislation.
Do not approach or insert any object into moving parts.
Workers' Health and Safety
The operator's workstation must be kept clean, tidy, and free of objects that may restrict free movement. The
workplace should be adequately lightened for the intended operations. Insufficient or excessive lighting may
present a hazard.
Ensure that the ventilation of the working areas is always optimal and that the extraction systems are always
functional, in good condition and in compliance with the legal requirements.

Personal protection devices

Operators carrying out installation and maintenance of the machine must wear the legally required individual
protective equipment listed below.
Safety footwear.
Eye protection.
Protective gloves.
Hearing protection.
EN
26