Function Of Keys And Display Icons (Control Evo Cop And Control Evo Cav); Date And Time - Casals QUANTICA EEC Manual De Instalación, Operación Y Mantenimiento

17.2.2 Function of keys and display icons (CONTROL EVO COP and CONTROL EVO CAV)

ON / STAND-BY
LED
Alarm
LED
Power supply
LED
ON / STAND-BY
KEY FUNCTION
• press and hold will turn on or turn off the device
• press and hold will reset the alarms with manual reset
• while setting the parameters, it has the function of " Back " key
• a simple pressure from main screen allows the access to the alarm page
• a simple pressure allows to move within the status pages
• a simple pressure allows to move on a superior menu during the menu navigation
• a simple pressure allows to increase one unit the value of the variable. Specific variable edit mode should
be activated
• a simple pressure allows to move on an inferior menu during the menu navigation
• a simple pressure allows to decrease one unit the value of the variable. Specific variable edit mode should
be activated
• a simple pressure allows to move within the status pages
• press and hold allows to enter and exit the settings menu
• a simple pressure allows to change the parameter value and set-point and confirm it while it is set to
"edit" (blinking)
• during the menu navigation, it has the function of " Enter " key
LCD REMOTE GRAPHIC DISPLAY
(CONTROL EVO COP and CONTROL EVO CAV versions only)

DATE and TIME

indicator
key
key key
LEFT UP
Extract air
temperature
key
OK
key key
DOWN RIGHT
EN
Operating mode
SUMMER / WINTER
Manual icon / Bands
enabled
ACTIVE components
icons
43