Guarantee - Dexter 800ETC1 Manual De Instrucciones

No. Description
95 Screw M8x40
FR
96 Locking nut M8
97 Tank groupware
ES
98 Leg (B)groupware
99 Feet (A)
100 Chain groupware
PT
101 Water plug
102 Wheel support (B)
103 Wheel cover
IT
104 Wheel
105 Hex nut M6
EL
106 Wheel shaft
PL

13. GUARANTEE

UA
1. Dexter products are designed to the highest DIY quality standards. Dexter provides a 24-month
warranty for its products, from the date of purchase. This warranty applies to all material and
manufacturing defects which may arise. No further claims are possible, of whatever nature, direct or
RO
indirect, relating to people and /or materials. Dexter products are not intended for professional use.
EN
the Dexter dealer will be able to solve the problem or correct the defect.
3. Repairs or the replacement of parts will not extend the original warranty period.
4. Defects which have arisen as a result of improper use or wear are not covered by the warranty.
Amongst other things, this relates to switches, protective circuit switches and motors, in the event of
wear.
5. Your claim upon the warranty can only be processed if:
• Proof of the purchase date can be provided in the form of a receipt.
• No repairs and/or replacements have been carried out by third parties.
• The tool has not been subjected to improper use (overloading
nonapproved accessories).
• There is no damage caused by non-observance of the safety instructions and the instructions for
use.
• There is no force majeure on our part.
• A description of the complaint is enclosed.
6. The warranty stipulations apply in combination with our terms of sale and delivery.
7. Faulty tools to be returned to Dexter via Dexter dealer will be collected by Dexter as long as the
product is properly packaged. If faulty goods are sent directly to Dexter by the consumer, Dexter will
only be able to process these goods if the consumer pays the shipping costs.
8. Products which are delivered in a poorly packaged condition will not be accepted by Dexter.
QTY No. Description
4 107 Wheel support (A)
4 108
1 109 Filtration sponge(B)
1 110 Filtration sponge(A)
1 111 Pump
1 114 Power cable tie
1 116 Bearing bush (B)
1 117 Scale label (B)
2 118 Wrench (A)
2 119 Wrench (B)
4 121 Washer
1 122 Hose x board (B)
dies such as sand or stones.
129
QTY
1
1
1
1
1
1
2
1
1
1
1
1