Measuring The Water Hardness - Gaggia Milano ANIMA PRESTIGE Instrucciones De Uso

ESPRESSO
ESPRESSO LUNG O
AROMA STRENGT H
ESPRESSO
ESPRESSO LUNG O
AROMA STRENGT H

Measuring the water hardness

Number of red small squares
Place a container under the coff ee dispensing spout and under the water
dispensing spout.
The standby button will blink. Press the button to switch on the machine.
Press the OK button to start the circuit priming.
The machine indicates to install the water dispensing spout.
Press the OK button to confi rm.
The machine will start dispensing hot water.
The bar under the icon shows the operation progress. When the operation is
complete, the machine stops dispensing automatically and starts warming up.
Use the supplied stripe for measuring the water hardness.
1 Immerse the stripe provided into running water for 1 second.
2 Remove the stripe from water and wait for 1 minute.
3 Count the number of small squares which have turned red and compare
the result to the following table.
Value to set
1
2
3
4
4 Press the MENU and the OK buttons, select the menu and scroll until
selecting the water hardness. Select the preferred water hardness setting
and press the OK button in order to confi rm.
Water hardness
very soft water
soft water
hard water
very hard water
English
13
INTENZA+
A
A
B
C