Meaning Of The Error Codes - Gaggia Milano ANIMA PRESTIGE Instrucciones De Uso

English
30

Meaning of the Error Codes

Error Problem
codes
01 The coff ee grinder is
clogged.
03 - 04 A problem occurred in the
brew group.
05 A problem occurred in the
water circuit.
14 The machine is overheated. There may be multiple
The list below reports the warning icons that the display can show, their
meanings and how to solve the problem. If the indicated solutions are
ineff ective because the display keeps on showing the error code icon
and the machine does not function correctly, please contact the Gaggia
customer service.
In case other error codes are shown, please take the machine to an au-
thorized after-sale service centre.
The contacts are listed in the guarantee brochure or on the www.gaggia.
com and www.gaggia.it websites.
Cause
The coff ee outlet duct is
clogged.
The brew group is dirty
or it is not well lubri-
cated.
The brew group is not
correctly positioned.
There is air in the water
circuit.
causes.
Possible solution
Switch off the machine using the main power
button and remove the brew group. Clean
the coff ee outlet duct thoroughly using the
handle of the measuring scoop or the handle
of a spoon. Switch on the appliance again.
Switch off the machine using the main power
button. Remove the brew group and clean it
thoroughly. (refer to the "Cleaning the Brew
Group" chapter).
Switch off the machine using the main power
button. Remove the brew group and reinsert
it again. Ensure the brew group is in its right
position before inserting it. Refer to the
"Reinserting the Brew Group" chapter.
Remove and reinsert the tank in the machine
twice. Ensure to insert the tank correctly in
the machine. Check that space of the water
tank is clean.
If you use a "INTENZA+" fi lter: pull out the
fi lter from the water tank and shake it to
remove all air from the fi lter. Reinsert the
"INTENZA+" fi lter into the water tank.
Switch off the machine and switch it on
again after 30 minutes. Perform this opera-
tion 2 or 3 times.