Leak Protection; Interior Lights; Water Temperature - Monogram ZDT925SPNSS Manual Del Propietário

Ocultar thumbs Ver también para ZDT925SPNSS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

USING THE DISHWASHER

LEAK PROTECTION

If a leak is detected, the dishwasher will drain and the
cycle will stop. The display will show "LEAK DETECTED".
Contact us for service.

INTERIOR LIGHTS

The interior LED lights provide better visibility for loading
and unloading. Do not look directly into the LED lights.
They turn on when the door is opened and turn off when
the door is closed. The lights will turn off after 15 minutes
if the door remains open. To turn the lights back on, close
and open the door.

WATER TEMPERATURE

The entering water must be at least 120°F (49°C) and
not more than 150°F (66°C), for effective cleaning and to
prevent dish damage.
RECOMMENDED DISHWASHER PRODUCTS
Monogram recommends the following high quality products
for use in its dishwashers:
For your manual detergent dispenser, Cascade®
Platinum™ ActionPacs™ or Finish® Quantum®
Automatic Dishwashing Detergent is recommended.
Powders, liquids, and gels may also be used but may not
work as effectively.
10
Do not attempt to replace the lights. If light replacement
is necessary, please contact Monogram Preferred by
calling 800-444-1845.
In Canada, call 888-880-3030.
Check the water temperature with a candy or meat
thermometer. Turn on the hot water faucet nearest
the dishwasher, place the thermometer in a glass and
let the water run continuously into the glass until the
temperature stops rising.
For your rinse agent dispenser, Cascade® Platinum™
Power Dry™ Rinse Aid or Finish® Jet-Dry® Rinse Aid.
49-4000215 Rev. 3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Zdt925siniiZdt925ssnss

Tabla de contenido