Monogram ZDT925SPNSS Manual Del Propietário página 17

LOADING THE DISHWASHER
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets
may vary from your model.
3RD RACK (MODEL ZDT985)
The 3rd rack is the recommended location for silverware
and has 2 trays:
Utensil Tray
The utensil tray holds serving spoons, chop sticks,
spatulas, cutlery, whisks, etc. Be sure not to overlap the
utensil heads.
The silverware tray holds silverware individually in slots
and is positioned by alternating the heads of the silverware.
These trays may be removed to allow for easier loading
and unloading, changing the side that the trays are on, or to
create extra space for the upper rack.
To remove a tray, fully extend the 3rd rack, grasp both the
front and back handles on one tray and gently lift the tray
out of the rack. To replace the tray, grasp both handles and
gently place it on the rack so that the deepest part is towards
the center of the rack.
8 Place Settings
49-4000215 Rev. 3
Silverware Tray
10 Place Settings
CAUTION
the silverware or utensil trays. The trays
may contain sharp or heavy items. If items
are dropped from the trays or the trays are
dropped, injury could occur.
IMPORTANT NOTES:
■
Do not allow cutlery of different materials to touch each
other in the 3rd rack. Doing so may cause discoloration
of the cutlery.
■
The trays are only meant to be used with a Monogram
3rd rack dishwasher to hold silverware, cooking utensils,
and other small items. Using the trays for any other
purpose could result in damage to the trays or damage
to anything interacting with the trays.
■
Ensure that the 3rd rack is fully closed before shutting
the dishwasher door. Shutting the door with the
rack partially extended could cause damage to the
dishwasher.
Take care when loading,
unloading, or transporting
12 Place Settings
*See Silverware Basket section
on how to load silverware
17