Rinse Aid Setting - Monogram ZDT925SPNSS Manual Del Propietário

USING THE DISHWASHER
USE A RINSE AGENT
High quality rinse agents such as
Power Dry™ Rinse Aid or
are designed for great drying action and to protect against
spots and film build-up on your dishes, glasses, flatware,
cookware, and plastic.
Filling the Dispenser
The rinse agent dispenser holds
agent. Under normal conditions, this will last approximately
one month - depending on setting.
1 Make sure the dishwasher door is fully open.
Open the Rinse Agent dispenser door.
2
Slowly add rinse agent until the cup is full. You may need
3
to pause several times to allow rinse aid to settle.
NOTE: Indicator window does not light up.
Clean up any spilled rinse agent with a damp cloth to prevent
4
foam from forming inside the dishwasher.
Close the Rinse Agent dispenser door.
5
49-4000215 Rev. 3
Cascade Platinum™
®
Finish Jet-Dry Rinse Aid
® ®
3.5 oz. (104 ml) of rinse

Rinse Aid Setting

The amount of rinse agent released into the final wash can
be adjusted. If water drops or hard water spots remain on
dishes after the dry cycle, increase the setting.
To adjust the setting
Open the Rinse Agent dispenser
adjuster clockwise to increase the amount of rinse agent,
counterclockwise to reduce the amount of rinse agent.
Clockwise to
reduce water
drops and hard
water spots
Rinse
agent
adjuster
door; then turn the
Counterclockwise
to reduce foaming
11