Loading - Monogram ZDT925SPNSS Manual Del Propietário

LOADING THE DISHWASHER
For best dishwashing results, follow these loading guidelines. Features and appearance of racks and silverware baskets
may vary from your model.
UPPER RACK
The upper rack is primarily for glasses, cups, and saucers.
For best wash performance, tilt cup and glass openings
toward the center of the rack. Other items such as pots,
pans, and plates may be placed in the upper rack. This is
also a secure place for dishwasher-safe plastic items. The
upper rack can be used for odd sized utensils. Sauce pans,
mixing bowls, and other similarly shaped items should
be placed face down for best wash performance. The
dishwasher has a hidden heater, so dishwasher safe plastic
items can be placed in the lower rack.
IMPORTANT: Ensure items in the upper rack do not
interfere with the 3rd Rack (on some models) when
loading and unloading.
Bottle Jets
The Bottle Jets system is the ideal location to
position baby bottles, tall sports bottles, or other
tall items with narrow openings. The Bottle Jets
clips hold bottles with small openings in place so
water jets are directed inside the bottles to clean
hard to reach areas. Clips can be installed or
removed by simply slipping the clip opening over
the top of the nozzle.
Adjustment
The upper rack allows 2" of adjustment up or
down to accommodate large items. The upper
rack may be lowered by pushing the long flaps on
each side of the rack. This will allow you to lower
the rack (see fig. Upper Rack). To raise the rack,
lift up on the rack until the rack locks in place.
Utility Shelf (on some models)
To add flexibility in loading, the utility shelf (on some
models) may be placed in the up or down position.
The shelf may also be used to secure stemware such
as wine glasses. Because these stemware items
come in various sizes, slowly push the rack in to
ensure the items do not bump into the edges of the
dishwasher, which may cause damage to the items.
Fold Down Tines (on some models)
The fold down tines (on some models) provide flexibility
for extra-large and hard-to-fit items. The tine rows can be
adjusted to a vertical or lay-down position.
49-4000215 Rev. 3
IMPORTANT: Ensure that items do not protrude through
the bottom of the rack or silverware basket where they will
block the rotation of the middle spray arm. This could result
in noise during operation and/or poor wash performance.
Clip
Sports bottle held in
Nozzle
Bottle Jets
Upper
Rack
place under a Bottle
place over a Bottle
Jets clip
A loaded upper rack
CAUTION
may be heavier than
anticipated. To prevent minor injury
or damage to the contents, do not
raise or lower the upper rack after
the rack is loaded.
Place the slots in the
utility shelf clips over
the vertical rack wires
and push down to
attach utility shelf onto
second wire of rack
Baby bottle held in
Jets clip
13