2- Fitting Of Consoles And Bolsters; 2-1-Pro Hl, Pro Hls, Pro Hlx, Pro Hxls Consoles - Zodiac PRO Serie Manual De Instrucciones

PORT CUT
4
700 mm
Ref.
1 Ventilation hose
2 Engine cable guide cable pull
3 Fuel hose guide
4 Wiring guide to port
5 Cable pull
6 Circuit-breaker
VI -2- FITTING OF CONSOLES and BOLSTERS
VI -2-1-PRO HL, PRO HLS, PRO HLX, PRO HXLS consoles:
The console can be positioned in the areas A and B. In this case, great care must be taken
when drilling; you will have to adjust the length of the screws to avoid that they damage the tank.
For an assembly in the area C, it will be necessary to draw the cables outside the initially
planned passages (by going through the rear locker for example).
LOCATION OF ACCESSORIES
STARBOARD CUT
DESCRIPTION
PRO 5.5
Page 67 / 73
1 2 3
280 mm
Issue 3
E
N
G
L
I
S
H