Fixing The Protective Flap - Zodiac MEDLINE 9.0 Manual Del Usuario

BUOYANCY CHAMBER - INFLATING THE BUOYANCY CHAMBER
II-3 FIXING THE PROTECTIVE FLAP
Fastening with inserts:
4
Place the buoyancy chamber and make fast the outer flap (buoyancy chamber deflated) using the
stainless steel bars and the screws supplied in the buoyancy chamber kit. To ensure the
mechanical hold of the fitting, use medium threadlock on the screws.
Fastening with bolts:
4
After inflating the buoyancy chamber (see the chapters below), fit the outer flap using the
stainless steel bars and screws provided in the buoyancy chamber kit. Apply sealing compound on
all the screws and in the hull holes to achieve watertightness.
Page 16 / 63
Issue 4