Installing The Buoyancy Chamber On The Hull; Securing At The Bow - Zodiac NZO 760 Manual De Instrucciones

BUOYANCY CHAMBER – Installing the buoyancy chamber on the hull
3
- Repeat for the other side of the buoyancy chamber.
- Bring the front part of the buoyancy chamber forward beneath the nose of the deck.
- Once again, pull the buoyancy chamber as far aft as possible, entering the boltrope into the
mini rail at the upper aft position.
- Inflate the nose of the buoyancy chamber slightly in order to verify that it is properly
centred and moulds to the hull and the deck. Restart the process if the buoyancy chamber is
not correctly positioned.
BUOYANCY CHAMBER – Securing

SECURING AT THE BOW

4
Make a loop with the strap, hook the shackle up to the U-bolt, then pull the tube backwards.
Proceed in the same way with the other tube."