Operation - cecotec BOLERO DRESSCODE 2000 AUTODOSIS Manual De Instrucciones

Electrical connections
- The washing machine requires a 220-240V 50 Hz power supply.
- The power supply cable of the washing machine has an earthed plug. This plug must be
connected to a 10 amp earthed socket.
- If you do not have a suitable socket and fuse with these conditions, make sure a qualified
electrician carries out the work.
- The warranty does not cover damage caused by improper use of the mains connection.
Warnings:
Do not handle the electric circuit and/or the plug if your hands are wet.
-
Before handling and/or cleaning the machine, disconnect it from the mains.
-
Clean the housing of the appliance with a wet cloth.
-
Do not use abrasive detergents.
-
Never force the door open or stand on top of it.
-
If you detect that your washing machine has been damaged during transport, do not use it.
-
Do not use an extension cord.
-
Use only the power cord supplied by Cecotec.
-
Improper connection may result in electric shock.
-

4. OPERATION

Before the first washing cycle
Cecotec advises you to perform a short first wash cycle to remove any residue during the
manufacturer's test.
1. Open the tap.
2. Close the door.
3. Pour detergent (more or less 30 ml) in the detergent compartment.
4. Select the short programme.
We recommend that the first wash cycle should be without any load and at low spin speed
(rpm).
Washing preparation
Step 1: Select the clothes to be washed according to...
Type of fabric/label symbol
Cottons, blended fibres, easy care/synthetics, wool, hand wash items.
Colour
- Separate coloured clothes from white clothes.
BOLERO DRESSCODE 2000 AUTODOSIS / BOLERO DRESSCODE 2000 AUTODOSIS SILVER
ENGLISH
63