cecotec BOLERO DRESSCODE 2000 AUTODOSIS Manual De Instrucciones página 78

ENGLISH
- Excessive foam formation;
- Unbalanced load due to heavy garments;
- Prolonged heating time due to low inlet water temperature.
In addition, during the filling phase, the machine determines the load and, if necessary, adjusts
the initial programme time displayed on the screen. You will recognise these periods because
an animation will appear on the time display.
Error codes
Here are some codes that the control panel may display if the washing machine stops when
the programme is running.
Check the following table and possible solutions.
Error on the display
"F01"
78
Error code list
Error description
Water inlet fault
Possible solution
Check if:
The faucet is completely open.
-
There is enough water pressure.
-
The water inlet pipe is connected.
-
The filtering net in the water inlet pipe is
-
blocked.
The water pipe is frozen.
-
Press the Start/Pause icon after fixing the
-
error.
If the error still appears, contact the
-
Cecotec Customer Service.