www.evolutionpowertools.com
POLARIZED PLUG
WARNING (USA ONLY): To reduce the risk of
electric shock, this equipment has a polarized plug
(one blade is wider than the other). This plug will
fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug
in any way.
WARNING:
• that the vibration emissions during actual use
of the power tool can differ from the declared
values depending on the ways in which the
tool is used especially what kind of workpiece
is processed; and
• of the need to identify safety measures to
protect the operator that are based on an
estimation of exposure in the actual conditions
of use (taking account of all parts of the
operating cycle such as the times when the
tool is switched off and when it is running idle
in addition to the trigger time).
LABELS & SYMBOLS
WARNING: Do not operate this machine
if warning and/or instruction labels are missing
or damaged. Contact Evolution Power Tools for
replacement labels.
Note: All or some of the following symbols may
appear in the manual or on the product.
Symbol
Description
V
A
Amperes
Hz
min
-1
Speed
~
Alternating Current
n o
No Load Speed
Wear Safety Goggles
Wear Ear Protection
Wear Dust Protection
Read Instructions
Double Insulation Protection
INTENDED USE OF THIS POWER TOOL
WARNING: This product has been designed to
be used with special Evolution blades. Only use
accessories designed for use in this machine
and/or those recommended specifically
by Evolution Power Tools Ltd.
When fitted with an appropriate blade
this machine can be used to cut:
Mild Steel
Thin Steel
Volts
Stainless Steel
Aluminium
Wood
Masonry
Hertz
Note: Cutting galvanised steel may reduce
blade life.
PROHIBITED USE OF THIS POWER TOOL
WARNING: This product is a hand operated
mitreing chop saw and must only be used as
such. It must not be modified in any way, or
used to power any other equipment or drive any
other accessories other than those mentioned in
this Instruction manual.
WARNING: This machine is not intended for use
by persons (including children) with reduced
physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they
have been given supervision or instruction
concerning the safe use of the machine by a
person responsible for their safety and who is
competent in its safe use. Children should be
supervised to ensure that they do not have
access to, and are not allowed to play with, this
machine.
7
CE Certification
UKCA Certification
TUV SUD Certification
Waste electrical and
electronic equipment
Warning
Do not touch - keep hands away
EN