Evolution S355 MCS Instrucciones Originales página 19

www.evolutionpowertools.com
UKCA DECLARATION OF CONFORMITY
The manufacturer of the product covered by this Declaration is:
UK: Evolution Power Tools Ltd. Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
The manufacturer hereby declares that the machine as detailed in this declaration fulfils all the
relevant provisions of the Machinery Directive and other appropriate directives as detailed below.
The manufacture further declares that the machine as detailed in this declaration, where
applicable, fulfils the relevant provisions of the Essential Health and Safety requirements.
The Directives covered by this Declaration are as detailed below:
This is fine for CE DoC page.Please use following for UKCA page:
UK legislation_Supply of Machinery (Safety) Regulations 2008
UK legislation_Electromagnetic Compatibility Regulations 2016
UK legislation _The Restriction of the Use of Certain Hazardous Substances in Electrical
and Electronic Equipment Regulations 2012
Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001
The Waste Electrical and Electronic Equipment Regulations 2013
And is in conformity with the applicable requirements of the following documents:
BS EN 62841-1:2015 • BS EN IEC 62841-3-9:2020/A11:2020 • BS EN ISO 12100:2010 •
EN IEC 55014-1:2021 • BS EN IEC 55014-1:2021 • EN IEC 55014-2:2021 •
BS EN IEC 55014-2:2021 • EN IEC 61000-3-2:2019/A1:2021 •
BS EN IEC 61000-3-2:2019/A1:2021 • EN 61000-3-3:2013 / A2:2021 •
BS EN 61000-3-3:2013 /A2:2021
Product Details
Description: S355MCS 355mm Metal cutting mitering chop saw
Evolution Model No: 102-0001, 102-0002
Brand Name: EVOLUTION
Voltage: 110V~,50Hz: 102-0002; 220 - 240V ~, 50Hz:102-0001
Input: 1600W:102-0002; 2200W: 102-0001
The technical documentation required to demonstrate that the product meets the requirements
of directive has been compiled and is available for inspection by the relevant enforcement
authorities, and verifies that our technical file contains the documents listed above
and that they are the correct standards for the product as detailed above.
Name and address of technical documentation holder.
Signed:
UK: Evolution Power Tools Ltd. Venture One, Longacre Close, Holbrook Industrial Estate, Sheffield, S20 3FR.
FR: Evolution Power Tools SAS. 61 Avenue Lafontaine, 33560, Carbon-Blanc, Bordeaux, France.
Print: Barry Bloomer - CEO
Date: 12/05/2022
19
EN