Machine Operation; Starting Machine - Deluxe - Kärcher BRS 43/500C 115V Manual De Instrucciones

Operations

Machine Operation

Pre-Run Inspection
Perform a pre-run inspection to find possible problems
that could cause poor performance or lost time from
breakdown. Check the rating plate to confirm voltage
and frequency is the same as the power supply. NOTE:
A 10% variation in voltage is acceptable.
Starting Machine - Basic
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make
sure that all covers are in place and secured
properly.
1. Connect the machine to a power supply.
2. Release the handle lock.
3. Press green button to power on the machine.
After applying a light spray of diluted interim carpet
cleaner onto the carpet using a pressurized tank
sprayer, commence cleaning by pushing and pulling
the machine slowly over the wetted carpet.
12

Starting Machine - Deluxe

1. Connect the machine to a power supply.
2. Release the handle lock.
3. Press green button to power on the machine.
4. Press and hold blue buttons to spray chemical.
Apply a light spray of diluted interim carpet cleaner onto
the carpet using the onboard spraying system. Spray
chemical while pushing the machine forward. Brush the
chemical into the carpet while pulling the machine
slowly over the wetted carpet. Move the machine in
multiple directions and overlapping strokes.
Flammable materials can cause an explosion or
fire. Do not use flammable materials with this
machine.
8.644-468.0 Manual Operator BRS 43/500C 115V
NOTE: Perform pre-run machine check before
operating machine.
FOR SAFETY: Before starting machine, make
sure that all covers are in place and secured
properly.
Once machine is plugged in spray function is oper-
ational.