Hinges/ Bearings; Measures After Completed Maintenance Work - Novoferm NovoDock L100 Manual De Montaje Y Funcionamiento

8.5

Hinges/ bearings

Lubricate the bearings on the dock leveller platform and on the hinged lip through the tapered holes with multi-
purpose grease (see arrows).
Fig. 4: Lubrication points, illustration may deviate from the product
8.6 Measures after completed maintenance
work
Put the dock leveller into rest position immediately
after use.
After a successful test run, the dock leveller is ready
for operation.
These assembly, operation and maintenance instructions must be kept for the entire period of use!
EN - 29