5.4.
Cleaning hatches (VAP30).
To access the cleaning hatches, we must first remove the left-hand side of the lining and the sheets that seal
them. Once we have access to the hatches, clean them.
Cleaning hatches.
5.4.1. Cleaning grids (VAP24).
Once the boiler is unplugged, we shall unscrew the rear panel (see image) and the decanting plate to reach
the inside of the boiler.
After these parts have been removed, we shall vacuum the inside of the boiler and the decanting plate. Once
finished, we shall reassemble the plate.
Plates
Cleaning hatches.
5.4.2. Registering doors (VAP 5-20).
To access the registering doors, the right side plate and the rear grille should be removed.
Registering dooR.
Ceramic fiber joint (replace).
56
Drawing 24
Drawing 25
Drawing 26