dirna Bergstrom bycool green line COMPACT 1.4 M.B. ACTROS 2011 Instrucciones De Montaje página 24

COMPACT
EN
15
Place the supplied console on the original
console frame and align the unit.
BE SURE THERE IS A GAP BETWEEN THE
CONSOLE FRAME AND THE FRONT.
Fasten supports tightening nuts until outside
16
EPDM joint of equipment is compressed,
between 3 and 6 mm;
Important: To avoid water from filtering inside
cabin, check EPDM joint tightening with unit
base, as indicated on diagram.
16
3-6mm.
Cabin roof
Fasten selflocked nut until
EPDM gasket is compressed
between 3 and 6 mm.
Tighten (4) M8 nuts to support and (4) to Unit
17
base.
All manuals and user guides at all-guides.com
EPDM gasket
10 mm*
(*) (approx. after tightening)
15
Base
EPDM Joint
24
Check compression
thickness using a
tape measure in the
four corners.
EPDM gasket
®
16
17