Button Functions; Operation - cecotec CookControl 9000 Waterproof Manual De Instrucciones

ENGLISH

4. OPERATION

Button functions

Unit conversion
While the scale is on, press
repeatedly the unit button to
select the desired measuring
unit until the desired unit is
shown.
12
COOKCONTROL 9000 WATERPROOF
04098_CookControl 9000 Waterproof_Manual_MV.indd 12
1. Place the scale on a flat, stable surface. Place a container or bowl (if
used) on the scale before operating it.
2. Gently press the On/Tare button to activate the device.
3. The display will turn on and will show 00000.
4. Wait until the LCD display shows "0".
5. Place the item to be weighed on the scale (or in a bowl if required). The
LCD will show the results.
6. Once you have finished weighing, press the On/Tare button to turn the
device off. The device will turn of automatically after 2 minutes of no
operation.
1. On/Manual off/Zero/Tare.
2. Unit conversion.
11/10/18 16:44