Maintenance And Spare Parts; Programmed Maintenance - W&H Sterilizer Calibration Device Manual Del Usuario

Maintenance and spare parts

All repairs, checks, maintenance and service must be carried out by the manufacturer only, at his own facilities.
The user, even if trained to service W&H sterilizers, is not permitted to service the calibration device.

Programmed maintenance

Although the device is fitted with a high precision and high stability pressure sensor, it is recommended to send it once a year for
check and (if necessary) adjustment purpose.
Spare parts
Should you need any spare replacement part or accessory, please refer to the table below.
Male-Female serial cable 1.8 m
Female-Female Null modem serial cable
Power supply and adapters
Test connection flat gasket (for the extension tube M16)
Viton O-ring 2043 (for the extension tube 1/4")
Silicone tube 3x8
Male serial port flat cable
SPARE PART TABLE
DESCRIPTION
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
PART NUMBER
A701002X
A701003X
U382901X
W460034X
W460032X
W230509X
F372022x
19