Technical Data - W&H Sterilizer Calibration Device Manual Del Usuario

Technical data

Electrical supply:
Nominal voltage:
Max. power:
Power supply characteristics:
Product:
Working temperature:
Working relative humidity:
Storage temperature /relative humidity:
Max altitude:
Overall dimensions:
Weight (complete):
Weight (device only):
Degree of protection (IEC 60529)
Electric / hydraulic product for indoor use, conform with the following standards:
2012/19/EU Waste Electrical and Electronic Equipment Directive (WEEE).
IEC 61010-1 Safety requirements for electrical equipment for measurement, control and laboratory use, general requirements.
EN 61326 Electrical equipment for measurement, control and laboratory use: EMC requirements.
TECHNICAL DATA
12-24 Vdc
4,5 W
Power supply must be EN61010 or EN60950 compliant.
Double insulated. Limited energy circuit to prevent fire in
single fault condition.
from +5°C to +40°C
Max. RH 80% up to 31°C, linearly decreasing to 50% at
40°C, not condensing.
-20°C to +60°C/0-90% RH
2000 m asl
W: 200 mm/H: 80 mm/D: 150 mm
3.4 kg
1.1 kg
IP30
CONFORMITIES
ENGLISH
DEUTSCH
FRANÇAIS
ESPAÑOL
PRODUCT DATA LABEL
22