Service And Maintenance; Controllable Functions - LGB Elektrolok Ge 4/4 III "Alpine Cruise" Manual De Instrucciones

Ocultar thumbs Ver también para Elektrolok Ge 4/4 III "Alpine Cruise":
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20

Controllable Functions

1
Lighting
Sound effect: Long whistle blast
Sound effect: Squealing brakes off
Raising/lowering pantographs, sequence
Sound: Greeting announcement
Sound: station announcements, sequence for Chur - St. Moritz
1, 2
Sound effect: Operating sounds
Raising/lowering pantographs, direction-dependent
Sound on/off
ABV, off
Sound effect: Short whistle blast
Sound effect: Main relay
Sound effect: Heating voltage relay
Sound effect: Blower
Sound effect: Compressor
Sound effect: Sanding
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Doors being closed
Sound effect: Railroad grade crossing
LV + LR
1
Sound 1
2
3
3
4
Sound 5
5
Sound 4
6
Sound 15
1
7
+ AUX 5
8
9
10
AUX 1 + 2
11
AUX 3
12
AUX 4
13
Sound 9
14
Sound 11
15
Sound 14
16
Sound 2
17
Sound 6
18
Sound 20
19
Sound 19
20
Sound 17
Controllable Functions
Sound effect: Letting off air
Sound effect: Rail joints
Sound effect: Coupling together (buffer to buffer)
BS
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Announcement
Sound effect: Announcement
FS
1
active in analog operation
2
with random sounds
3
is turned off by Function 7
SERVICE
Lubrication
The axle bearings should be lubricated occasionally with a small amount of Märklin-
Öl (7149).
Changing Light Bulbs (E130 023)
Headlights: Carefully lift the glass from the lantern. Pull the light bulb out of the
socket with a pair of tweezers. Insert new light bulb. Put the model back together.
Interior Lighting: Pull the light bulb out of the socket with a pair of tweezers. Insert
new light bulb.
Changing Traction Tires (E126 174)
• Remove the old traction tire with a small flat blade screwdriver:
• ift the old traction tire out of the groove in the driving wheel.
• Carefully push the new traction tire over the wheel and insert it into the groove of
the wheel.
• Check to make sure that the traction tire is properly seated.
10
21
Sound 18
22
23
24
25
26
27

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

21431

Tabla de contenido