Service Components - Rational UltraVent XS Manual De Instalación Original

en
1. Loosen the 2 marked screws
[ Photo 30] and remove the cover of
the condensation hood.
2. Unscrew the cover of the condensa-
tion hood [ Photo
3. Clean the top side in the dishwasher.
4. Spray the interior of the condensation
hood with the hand shower
[ Photo 32].
5. Attach the cover of the condensation
hood.
Replacing the HEPA filter
The yellow LED lights up when the HEPA
filter should be replaced [
a
The unit on which the condensation
hood is to be installed is disconnected
from the mains.
a
The condensation hood is disconnec-
ted from the mains.
1. Disassemble the stem.
2. Remove the 2 marked screws
[ Photo 25].
3. Pull out the filter unit and open the 2
screws [ Photo
4. Replace the HEPA filter [
7

Service components

NOTICE
Availability of service components
The service components are available
from the catalogue of service
components.
18 / 112
31].
Photo 24].
26].
Photo 27].
80.51.574_iCombi Pro-iCombi Classic_UV XS_IM_V01_EU-west
7 | Service components