Emos E0422 Manual De Instrucciones página 5

or destroy the probe. The outdoor portion of the wired temperature
probe must be anchored so as to prevent its tearing off in the wind.
Indoor and Outdoor Temperature
1. Outdoor temperature value is shown in the top half of the
display in field 9.
2. Indoor temperature value is shown in the bottom half of the
display in field 7.
Memory of Maximum and Minimum Temperature
The thermometer automatically records the values of maximum and
minimum measured temperature.
Values for outdoor temperature (OUT) are displayed in fields 2 and 8.
Values for indoor temperature (IN) are displayed in fields 4 and 5.
Measurement memory is automatically erased every 24 h from the
insertion of batteries.
Example: If you insert batteries at 7:00, memory will be erased each
following day at 7:00.
Changing °C/°F Temperature Units
Remove batteries from the thermometer.
Move the switch on the back of the thermometer to either °C or °F.
Put the batteries back in the thermometer.
Upkeep and Maintenance
The product is designed to serve reliably for many years if used
properly. Some advice for
proper operation:
• Read the manual carefully before using this product.
• Do not expose the product to direct sunlight, extreme cold and
moisture, and sudden changes in temperature. This would reduce
measuring accuracy.
• Do not place the product in locations prone to vibration and
shocks; these may cause damage.
• Do not expose the product to excessive force, impacts, dust, high
temperatures or humidity. They could cause malfunction, shorter
battery life, damage to batteries and deformation of plastic parts.
• Do not expose the product to rain or moisture, it is not designed
for outdoor use.
5