Derechos De Acceso - GEMÜ 4242 Instrucciones De Uso

16 Datos específicos de DeviceNet
Class Inst. Derechos de
acceso
Fh 15h Get
Fh 16h Get
Fh 17h Get
Fh 18h Get
Fh 19h Get
Fh 1Ah Get
Fh 1Bh Get/Set
Fh 1Ch Get
GEMÜ 4242
Attr. Parámetro
1h Valve position
1h Sensor error
1h Programing error
1h Pneumatic error
1h Internal error
1h Stroke reduction war-
ning
1h Valve cycles user
1h Valve cycles total
Longi- Tipo de
tud datos
2 bytes UINT 0
1 byte USINT 0
1 byte USINT 1
1 byte USINT 0
1 byte USINT 0
1 byte USINT 0
4 bytes UDINT 0
4 bytes UDINT 0
42 / 46
Ajuste de Posibilidades de ajuste
fábrica
0 = Sensor OK
1 = Sensor error position
closed
2 = Sensor error position
open
0 = Programming OK
1 = not calibrated
2 = no stroke
3 = stroke < min. stroke
4 = Sensor error position
closed
5 = Sensor error position
open
6 = Sensor error position
closed + open
0 = Pneumatic OK
1 = Pneumatic error posi-
tion
closed
2 = Pneumatic error posi-
tion open
3 = Pneumatic error middle
position
0 = Device OK
1 = un-valid crc-check
2 = un-valid serial number
3 = Memory error
0 = Stroke OK
1 = Stroke reduction posi-
tion
closed
2 = Stroke reduction posi-
tion open
3 = Stroke reduction posi-
tion
closed + open
Se puede restablecer a 0,
indicación de valores nu-
méricos
0–429496729
Indicación de valores nu-
méricos
0–429496729
www.gemu-group.com