BABYTREND HC02XXXA Manual De Instrucciones página 6

ASSEMBLY
5) • Insert metal tabs (1) and (2)
directly into the seat base
slot until it secures into place.
Ensure the backrest sits in the
base correctly (Fig. 5a).
• Important Pin Set Up: The
backrest must be in the
most upright position before
inserting the pins (Fig. 5b).
• Press Pins In: Ensure the seat
parts latched together in the
upright position. Insert the pin
all the way into each side of the
seat base and test the recline
feature (Fig. 5c).
CAUTION: DO NOT push pin
into the base only. Must catch
base and backrest (Fig. 5d).
Press
1 1
Fig. 5c
7
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Tabs
1 2
"Press and Click"
Fig. 5a
Keep Upright
Fig. 5b
2 2
Recline Handle Recline Handle
Fig. 5d
• Align the Seat Base into the
Height Brackets. Ensure the
brackets are locked into the Seat
Base (Fig. 5e).
6) • Slide the Footrest into the Height
Bracket (Fig. 6). Lock Footrest
into place.
NOTE: Adjust the height of the
footrest by squeezing both tabs
simultaneously and lift up
(Fig. 6).
REMOVAL: Remove the foot
rest by squeezing both tabs
simultaneously and pull out from
the height bracket.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 5e
Fig. 6
8