BABYTREND HC02XXXA Manual De Instrucciones página 7

ASSEMBLY
7) • Loop the flap on the back of the pad over the top of the Seat Back. Connect the Seat
Pad to the Seat Back with the two Elastic Loops. These fit over the Attachment Tabs
located near the top harness slots (Fig. 7a).
• Attach the bottom of Seat Pad to the Seat Base with the two Elastic loops located at
the rear of the bottom of the Seat Pad. These fit over the Attachment Tabs located on
the Seat Base near where the Seat Back and Seat Base Join (Fig. 7b).
• Attach each anchor hook of the Seat Pad to the side of the seat armrest
(Fig. 7c). Ensure that the slot of the anchor hook slides through the under side
division (Fig. 7d).
Fig. 7a
Fig. 7c
9
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
TO ATTACH TRAY
8)
• To attach the Tray, squeeze the release handle
• The Tray has a 4-position adjustment. To
Fig. 7b
TO ATTACH TRAY INSERT
9) • The dishwasher safe food Tray Insert snaps
• The Tray may be stored on the back legs of
Fig. 7d
WARNING:
Always
check that the high chair is
locked in the open position
before using.
WARNING:
The tray
is not designed to hold
the child in the chair. The
child should be secured in
the high chair at all times
by the 5-point restraining
system, either in the
reclining, semi-reclining or
upright position.
located underneath the tray and firmly press
into the positioning slots (Fig. 8a).
adjust the position, squeeze the Tray's release
handle located underneath the tray and
reposition the tray to the desired position
(Fig. 8b). Release the Tray's handle. Check
that the Tray is securely locked in its new
position.
onto the High Chair Tray and is held in place
by tabs on the sides of the Tray. When
installing the Tray Insert make sure that its
snaps into place to prevent the child from
removing the Tray Insert. To remove Insert,
unsnap the tabs from the Tray.
the High Chair. Align the holes in the rear of
the tray with the small pegs on the back legs
(Fig. 9). NOTE: To remove, lift the tray.
Copyright © 2022, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
Fig. 8a
4-position
Tray Release located underneath tray
Fig. 8b
10
Fig. 9