Adjust The Interpupillary Distance; Diopter Adjustment; Use Of Eyeshields - Optika Italy B-1000 Serie Manual De Instrucciones

10.5 Adjust the interpupillary distance
Observing with both eyes, hold the two eyepiece prism assem-
blies. Rotate them around their common axis until the fields of
view coincide.
• The graduation on the interpupillary distance indicator
②, pointed by the spot "." on the eyepiece holder, shows
the distance between the operator's eyes. (Fig. 23)
The range of the interpupillary distance is 48-75 mm.
10.6 Diopter adjustment
1. Look into the right eyepiece with your right eye only, and
focus on the specimen.
2. Look into the left eyepiece with your left eye only. If the
image is not sharp, use the dioptric adjustment ring ③ to
compensate. (Fig. 24)
• The adjustment range is ±5 diopter. The number indicated
on the adjustment ring graduation should correspond to
the operator's dioptric correction.
10.7 Use of eyeshields
• Use with eyeglasses
Fold rubber eyeshields with both hands. Folded eyeshields avoid
scratching the lenses of eyeglasses. (Fig. 25)
• Use without eyeglasses
Raise eyeshields and observe at the microscope placing eyes
to the shields, avoiding external light to disturb the observation.
(Fig. 26)
③
Page 23
②
F ig. 23 F ig. 23
F ig. 24 F ig. 24
F ig. 25 F ig. 25
F ig. 26 F ig. 26