Cristal De La Puerta Porta Dentro; Porta Fuera - Fri-Jado TDR 7 p gas Manual De Mantenimiento

Página 30
EXTRACCIÓN Y SUSTITUCIÓN DE PIEZAS

CRISTAL DE LA PUERTA PORTA DENTRO

1. Separe la puerta interior de la puerta exterior.
2. Levante la puerta interior hacia arriba para sacarla
de las bisagras.
3. Coloque la puerta nueva en las bisagras.
4. Cierre la puerta interior en la puerta exterior.
Nota: Apriete de tuercas máx. 8 nm o
5,9 lbf.ft

PORTA FUERA

1.
this aside.
2.
procedure.
3.
and loosen the locknut according prior procedure.
The door must be closed.
4.
towards yourself, before lifting it out of the hinge
on the bottom side. See to it that the washers stay
on the hinge.
5.
6.
bottom side and push the 2 studs on the top hinge
through the openings on the top side and screw the
nuts on it .
7.
Note: Tightening of nuts max. 8 Nm. or
5.9 lbf.ft
Lift the inner door out of the hinges and lay
Remove the left side panel according prior
Remove the 2 nuts behind the upper hinge
Hold the door on both sides and move this
Also remove the top hinge.
Place the top hinge on the new door.
Place the new door on the hinge on the
Adjust the door according prior procedure.
Manual de mantenimiento para TDR7 P Gas - forma 9124025 - rev. 01/2022