Remote Diagnostics; Data Protection; Basic Settings; Changing The Basic Set- Tings - Siemens CT7 Serie Manual De Usuario

Basic setting
Remote start
Software update
Note: When "WiFi" and remote start
are switched on,
the display.
13.3 Remote diagnostics
Customer Service can use Remote
Diagnostics to access your appliance
if you contact them, have your appli-
ance connected to the Home Con-
nect server and if Remote Dia-
gnostics is available in the country in
which you are using the appliance.
Tip: For further information and de-
tails about the availability of Remote
Diagnostics in your country, please
visit the service/support section of
your local website: www.home-con-
nect.com
13.4 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
¡ Unique appliance identification
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
¡ Security certificate of the Wi-Fi
communication module (to ensure
a secure data connection).
Selection
On
Off
-
and appear on
Description
Switch remote start on the appliance
on and off.
Note: With the "Home Connect" app
only switch-off is possible.
Note: This setting is only available
with a software update.
¡ The current software and hardware
version of your appliance.
¡ Status of any previous reset to
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
14 Basic settings
You can configure the basic settings
for your appliance to meet your
needs and call up additional func-
tions.
14.1 Changing the basic set-
tings
Press ⁠ .
1.
a The display shows the list of basic
settings.
Change the required basic setting.
2.
a The appliance saves the basic set-
ting automatically.
To go back to the menu, press
3.
To exit the basic settings, press
4.
Tip: To call up brief information,
press ⁠ .
Basic settings en
55
⁠ .
⁠ .