Publicidad
Relevante Informationen
Relevant information
Les informations pertinentes
EN
FUSE REPLACEMENT ONLY RELEVANT FOR 995.180 201 / 601
If the product does not function properly, there is a possibility of a blown
fuse caused by over-current. To check the fuse follow the steps below.
1. Always remove plug from receptacle or other outlet device before
installing or replacing fuses.
2. Open the fuse cover
arrow on the plug.
3. Remove the fuse carefully and inspect it for a damaged filament
4. The plug contains one spare fuse. If needed also remove the spare fuse
20
carefully.
5. Replace fuse as needed. Replacement fuses should be 8A, 125 V
rated fuses only! Risk of fire!
6. Close the fuse cover
7. Reconnect the product according to the mounting instruction
Información relevante
A
by sliding it in the direction indicated by the
A
by sliding it back into initial position
A
USE ONY 125V
FUSE 8A MAX
DO NOT OPERATE
THE PRODUCT WITHOUT
FUSE COVER
Publicidad
