Starting Up The Unit; Technical Specifications - Nedo X-Liner 5.2 Manual De Instrucciones

6 Operation

6.1 Starting up the unit

• Set up or fix the unit according to the intended use. Ensure the levelling range of ±4° is not
exceeded.
• Lock the pendulum locking device for use without self-levelling. To do this, push the unit
switch into position 1
• Release the pendulum locking device for use with self-levelling. To do this, push the unit
switch into position 2
flash, the X-Liner 5.2 is outside the self-levelling range.
• If you have finished working with the unit, lock the pendulum locking device and use the
ON/OFF button (press for 3 secs.) to switch off the unit.
6.2 Self-levelling
The X-Liner 5.2 has a self-levelling feature. If
the unit is placed in a slanted position of up to 4°
in any direction, the laser beams are plumb and
horizontal.
If the 4° range is exceeded or the pendulum
locking device is locked, the projected laser line
flashes.

7 Technical Specifications

Type
Ref.-No.
Laser configuration
Accuracy
Damping
Thread
Working range
Wavelength
Laser class
Output
Self-levelling range
IP protection class
Power supply
Battery life
Operating temperature
Storage temperature
Dimensions
Weight
We reserve the right to make technical changes.
Operating Instructions X-Liner 5.2
and use the ON/OFF button to switch on the unit.
and switch on the unit with the ON/OFF button. If the laser lines
X-Liner 5.2
460 872
2 lines: 1 horizontal, 1 vertical, together 1 cross (H/V)
5 dots: right, left, front, top, bottom
Laser lines: ±0.3 mm/m
Laser dots: ±0.4 mm/m
Magnetic
BSW 1/4" and BSW 5/8" on the multi-functional base
Ø 60 m
630 - 680 nm
2M
< 1 mW
±4°
IP54
Batteries: 3 x 1.5 V (AA)
approx 15 h
-5 °C to +40 °C
-20 °C to +70 °C
L 120 mm / W 69 mm / H 116 mm
0.510 kg
www.rusgeocom.ru
EN
12