Before Use; Using The Device; Connection - ULTIMATE SPEED ULGD 5.0 C1 Traducción Del Manual De Funcionamiento Original

Store the car and motorcycle battery charger
„
in a dry place and protect the device from
1
moisture and corrosion.
Do not drop the car and motorcycle battery
„
charger
z Before use
Take all parts from the packaging and check whether
„
the device or parts show any damage. If this is the
case, do not use the device. Contact the manufacturer
via the indicated service address. Remove all protective
films and other transport packaging. Check that the
delivery is complete.
Always pull the mains plug from the socket before you
„
perform any work at the car and motorcycle battery
charger
1
Before connecting the charger please read the user
„
instructions for the battery.
In addition, you must adhere to the instructions from the
„
vehicle manufacturer where a battery is continuously
connected in the vehicle. Secure the car or motorcycle,
switch the ignition off.
Clean the battery poles. Make sure that the dirt does
„
not come into contact with your eyes.
Make sure that there is sufficient ventilation.
„
Note: The ambient temperature is measured in the
charger. Hence, for optimum function, make sure the
battery exhibits the same temperature as the environment.
z Using the device
z Connection
Note:
Always observe the instructions from the vehicle manufac-
turer or the battery manufacturer.
... / Before use / Using the device
while it is being used.
1
.
GB/MT 97