Casada ECOSONIC 3D Manual De Instrucciones página 35

Operation
4. INSTRUCTIONS FOR PLAYING MUSIC THROUGH THE SPEAKERS
Access the main menu of the smart device. Open Settings and select the Bluetooth option.
1
Open Bluetooth and the Bluetooth will automatically search for a new Bluetooth device.
The smart device will search for the corresponding Bluetooth model (e.g. Ecosonic-Music).
2
Press the Pair button. When asked if you want the speakers to pair with the device, simply
press Pair again to finish.
Turn on Music Player on the smart device and select a music track.
3
5. RESETTING THE MASSAGE CHAIR
Press the red On/Off button during the massage to stop all massage functions immediately.
1
The massage mechanism and the automatic sit-up function will reset.
Once the massage session is finished (20 minutes when switched on), all massage functions
2
are automatically switched off and the reset position of the massage mechanism is not
changed.
After resetting, turn off the power to the entire device.
3
Drawing of the power supply switch position
6. TURNING THE CALF SUPPORT
To do this, first turn the calf piece around until it hits the fixed and non-rotatable cross strut
1
of the calf support (as shown in Fig. 1).
Then swivel the calf support back down while pulling it forward about 5 cm (as shown in
2
Fig. 2). Perform in reverse to return the calf support to its original position.
POWER INPUT ON/OFF
1 2
Disconnect the power cable
35