Carbon Brushes; Disposal And Recycling; Service Information - EINHELL TC-ID 720/1 E Manual De Instrucciones Original

possible. Wipe the equipment with a clean
cloth or blow it with compressed air at low
pressure.
•
We recommend that you clean the device
immediately each time you have finished
using it.
•
Clean the equipment regularly with a moist
cloth and some soft soap. Do not use
cleaning agents or solvents; these could
attack the plastic parts of the equipment. En-
sure that no water can seep into the device.
The ingress of water into an electric tool in-
creases the risk of an electric shock.

8.2 Carbon brushes

In case of excessive sparking, have the carbon
brushes checked only by an authorized service
agent.
Danger! The carbon brushes should be re-
placed by the authorized service technician.
8.3 Maintenance
There are no parts inside the equipment which
require additional maintenance.
8.4 Ordering spare parts and accessories
Please provide the following information when
ordering spare parts:
•
Type of unit
•
Article number of the unit
•
ID number of the unit
•
Spare part number of the required spare part

9. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offices.
Anleitung_SA_TC_ID_720_1_E_SPK8.indb 27 Anleitung_SA_TC_ID_720_1_E_SPK8.indb 27
GB
10. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.

11. Service information

We have competent service partners in all coun-
tries named on the guarantee certificate whose
contact details can also be found on the guaran-
tee certificate. These partners will help you with
all service requests such as repairs, spare and
wearing part orders or the purchase of
consumables.
Please note that the following parts of this product
are subject to normal or natural wear and that the
following parts are therefore also required for use
as consumables.
Impact Drill
Wear parts*
Consumables*
* Not necessarily included in the scope of deli-
very!
In the effect of defects or faults, please inform the
problem to the contact address indicated at the
warranty card of your country. Please
ensure that you provide a precise description of
the problem and answer the following questions
in all cases:
•
Did the equipment work at all or was it defec-
tive from the beginning?
•
Did you notice anything (symptom or defect)
prior to the failure?
•
What malfunction does the equipment have in
your opinion (main symptom)?
•
Describe this malfunction.
The reprinting or reproduction by any other
means, total or partiallly of documentation and
papers accompanying products, is permitted only
with the express consent of Einhell Germany AG.
Subject to technical changes without prior notice.
- 27 -
Parts
Carbon brushes
Drills/Bits
04.08.2022 08:49:26 04.08.2022 08:49:26