Kuppersbusch KI6870.0SR Instrucciones De Uso página 53

EN
press on the CHEF sensor
until the led (17) located on the icon
lights up. Once the function is
on the power indicator (3).
You can override the function at
by changing the power level or by
MELTING FUNCTION
This function sets an automatic power
control suitable for maintaining a low
temperature in the cooking zone.
Ideal for defrosting food or for slowly
on the CHEF sensor
led (18) located on the icon
symbol will appear on the power
indicator (3).
You can override the function at any time
special function.
SIMMERING FUNCTION
This function sets an automatic power
Fig. 16
Fig. 12
52
control suitable for keeping simmering.
(16)
sensor
on the icon
will appear
appear on the power indicator (3).
You can override the function at any time
special function.
(depending on the model)
This function enables the automatic
where the
Conditions of the container
(16) until the
For a proper operation of the Quick
lights
container that meets the following
preconditions:
- Bottom size as close as possible to
the diameter of the plate.
-WITHOUT CAP.
- Filled to over half its capacity at
room temperature water (never
use warmed or hot water).
(16) until the led (19) located
lights up. Once the
will
symbol appears.
Failure to comply with these conditions
will distort the proper control of boiling.
WARNING: do not use this
feature for a different cooking
purpose other than boiling water.
Never use oil, it may lead to overheat
Activation of the function
and press the CHEF sensor
until the led (20) located on the icon
lights up.
power indicator (3) ; a moving segment
is under system's control.
When the system detects that it is about
Take this opportunity to prepare your
food for boiling or baking as desired.
be heard; if you have not already done
activate the timer and stopwatch for you
so that you can control how long the
food is to be boiled and the symbol
will appear on the power indicator (3).
30 seconds after activating the
system will decrease the power supplied
in order to maintain a gentle and
continuous boil. The timer will remain
active until the end of cooking.
and set a time for the countdown and
automatic shutdown of the plate (see
section Timer Function).
Deactivation of the function
You can override the function at any time
(16)