SAME DEUTZ-FAHR iMonitor Uso Y Mantenimiento página 27

USE AND MAINTENANCE
BLUETOOTH
This screen allows the user to confi gure the properties of the Bluetooth module in the I-Monitor on-board computer.
In this menu the user can change the following Bluetooth settings:
1. Disconnect: used to deactivate the connection
2. Device name: allows the user to change the name of the device (useful
when using more than one terminal)
3. Bluetooth PIN: allows the user to edit the Bluetooth password (PIN)
4. Visible: if not enabled, switches off the Bluetooth module completely
5. Auto-connect: if enabled, allows automatic connection when a mobile
phone is brought within range of the I-Monitor.
6. Volume control
On pressing "Dev. name", the screen displays a keypad, which the user can oper-
ate using the rotary control knob.
To enter the device name proceed as follows:
turn the knob to select the desired letter;

Press the knob again to confi rm the letter selected.

The letters entered appear in the horizontal bar above the keypad.
After entering all the letters required, use the rotary knob to select the OK key and
then press the knob to confi rm the name.
The on-screen keypad contains the following elements:
1. Horizontal bar: displays the letters entered by the user
2. OK: used to confi rm the name entered
3. Del: deletes the last character (letter/number/symbol) entered
4. \n: displays a cursor in the horizontal bar (point 1)
5. RST: cancels the name entered
6. ESC: exits the keypad and returns to the main BLUETOOTH screen
7. 123: used to change the functions of keys on the keypad as follows:
press once to display lower case letter keys;

press twice to display the symbol keys;

press three times to display numeric keys.

When a mobile phone is connected to the Bluetooth module, the computer confi gures itself as a speaker-phone audio device.
The procedure for connecting a mobile phone to the I-Monitor may vary according to the make of the phone.
In most cases to activate a Bluetooth device proceed as follows:
switch on Bluetooth on the mobile phone and perform a search for other Bluetooth devices;

enter the password 0000;

accept the connection request.

To disconnect a mobile phone from the on-board computer, proceed as follows:
turn the knob to select "Disconnect";

press the knob to disconnect the mobile phone.

Fig. 10
Fig. 11
1-5