SAME DEUTZ-FAHR iMonitor Uso Y Mantenimiento página 30

ENGINE
This screen presents the following information:
1. Engine speed
2. Engine coolant temperature
3. Engine load as function of groundspeed (power %)
4. Turbocharger pressure
5. Engine speed memory
TRANSMISSION
This screen displays the following data:
1. CRUISE CONTROL setting
2. Transmission oil temperature
3. Rear and front PTO speeds
4. AUTO PTO status and activation/deactivation height setting
5. Engine rpm deviation in PTO mode
In the Cruise control area the user can program two pairs of transmission speed
values. The values can be changed using the rotary knob.
The fi gure shows the Cruise Control area:
1. Forward cruise speed setting
2. Reverse cruise speed setting
3. Cruise speed (Memory 1)
4. Cruise speed (Memory 2)
In the AUTO PTO area the user can set the heights of the lift arms at which the
rear PTO is to be engaged and disengaged. The values can be changed using the
rotary knob.
The operator can control activation or deactivation of the Auto PTO separately.
The bar on the left indicates the limits of the Auto PTO relative to the absolute
position of the hitch.
The bar on the right indicates the position of PTO activation/deactivation relative to
the maximum lift height potentiometer (expressed as percentage value).
The illustration shows the Auto PTO area:
1. Empty arrow symbol: indicates deactivation of PTO
2. Solid arrow symbol: indicates activation of PTO
3. Symbol indicating activation of the Auto PTO
1-8
USE AND MAINTENANCE
Fig. 19
Fig. 20
Fig. 21
Fig. 22