How To Use; Cleaning Station - ZACO M1S Manual Del Usuario

How to use

Cleaning station

1. Installation
Place the charging station against the wall and insert the power cable.
Note
1. Do not place the cleaning station in direct sunlight.
2. Please ensure a space of at least 0.5 m on both the left and right sides of
the cleaning station, and a space of at least 1.5 m in front of it as shown.
3. Pay attention to the power cable, otherwise it may be dragged by the robot,
causing the cleaning station to move or power off.
4. The clean water tank, dirty water tank, and rinsing plate must be installed
in place.
12
Find more information at www.zaco.eu
English