ZACO M1S Manual Del Usuario página 21

English
How to use
Operation
19. Resetting Wi-Fi
When your router or Wi-Fi access password has been changed, you have to reset
your Wi-Fi connection by pressing and holding both
the robot is switched on. The Wi-Fi connection is reset successfully when a voice
prompt "Wi-Fi reset and network configuration activated" is audible.
20. Resetting system
Press the reset button for 3s. When you hear "successfully reset the system", the
robot will restart automatically, and relevant settings such as scheduled cleaning
and Wi-Fi will be reset to the factory state. Press the reset button for 10s. After you
hear "successfully recover the system", the robot will restart automatically, and the
relevant settings such as scheduled cleaning and Wi-Fi will be reset to the factory
state, and the system will be reset to the previous firmware version.
Note
After resetting the system, the robot needs to reconnect the APP, all previous
settings in the APP are cleared.
Find more information at www.zaco.eu
and for 7 seconds while
21