ZACO M1S Manual Del Usuario página 19

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

English
How to use
Operation
11. Virtual wall / no-go areas
The user can define virtual wall/ no-go-areas within the APP for the robot.
Note
1.
Before using this function, you have to create and save a map in the APP.
2.
Moving the robot or changes within the indoor environment may lead to a
loss of the original map and any virtual wall/ no-go areas.
12. Auto-Resume
This product has the function of auto-resume. During the cleaning process, when
the power is low, the robot will automatically find the cleaning station to charge.
After charging, the robot will return to the point where it left off to continue
cleaning. If the cleaning is manually interrupted or the robot is moved or operated
during recharging or charging, this auto-resume will be cancelled.
13. Default cleaning
When no map is stored, and if default cleaning is chosen, the robot will start
cleaning in intervals of 6 m × 6 m. Once a map is stored, if default cleaning is
selected, the robot will start cleaning each room along the planned route.
14. Edge cleaning mode
When choosing edge cleaning in the APP, the robot will automatically start
cleaning along the edges of your room.
Note
During cleaning, the robot may go beyond a defined area, so be sure to remove
any obstacle on the floor within defined area since definition of any area will not
ensure safe separation.
Find more information at www.zaco.eu
19

Publicidad

Tabla de contenido
loading

Tabla de contenido