Environmental Implications / Battery Removal - ZACO M1S Manual Del Usuario

Safety instructions
Use instructions
1. Do not use any third-party battery, power cable or cleaning station.
2. Do not disassemble, repair or modify the battery or cleaning station.
3. Do not wipe or clean the charging points of the cleaning station with wet cloth
or wet hands.
4. Do not place the cleaning station near the heat source (such as radiator).
5. Before scrapping the robot, turn the power off and remove the battery.
6. If the product is to be stored for a long time, charge it fully and store in a dry
area in the shade.
7. It is recommended to charge it at least once every 3 months to avoid battery
damage.
Environmental Implications
The chemicals contained in the built-in lithium-ion battery may pollute the environment.
Before scrapping remove the battery and dispose of responsibly and carefully according
to local rules and regulations.
Battery Removal
The instructions below apply only when storing the robotic vacuum cleaner. It is not for
routine operations:
1. Run the robot until the battery is too low to work.
2. Switch off.
3. Remove the bottom shell of the robotic vacuum cleaner.
4. Press the buckle to pull out the connector plug and remove the battery.
6
Find more information at www.zaco.eu
English